In this article I provide you online dummy practice test for ccna 200-301. The questions of this article practice test for ccna 200-301 may be helpful you to check your knowledge about networking or ccna exam 200-301. This test for ccna 200-301 contains a 10 questions mcq related to Network Access. There are many online websites and books available for Practice for ccna 200-301 exam. You can found these resources easily via any online search engine like google or yahoo etc. Along with these resources attempt the test for ccna 200-301 on this website may be helpful you to build confidence and check your knowledge.
How to attempt this Practice test for ccna 200-301 set 28
This article have 10 questions with multiple answers. You need to select the correct answer and at the end of the quiz just click on the button “click to check your answer”. A message will prompt on your screen with the exam score. You can also see the correct answers on page. So play the below quiz and do a dummy test for ccna 200-301 to check your knowledge about ccna 200-301 exam. At the end of this article link available for next or previous quiz. The complete list of all quiz is available for dummy test for ccna 200-301 here.
-
1. What is the problem when you got an error "%CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch -discovered". The error occurs when you need to change the native VLAN 1 to 999?
A) There is no any trunking protocol configured on interface.
B) Before changing the VLAN interface should be changed.
C) The interface running ISL, it should be changed to 802.1Q.
D) CDP should be running on the interface.
-
2. Two switches are connected with a trunk link. The interfaces of both switches belongs to VLAN 20 and default respectively. What problem can be occurs?
A) When a untagged frame transfers from switch B its VLAN tag change to vlan 20.
B) CDP will not function on the port.
C) VTP will not function on the port.
D) Trunk mode will not function on the interface.
-
3. Which protocol give alert message when a native VLAN mismatch on a configured trunk?
A) 802.1Q.
B) VTP.
C) CDP.
D) ISL.
-
4. A tunk link configured both side with command Sw(config-if)#switchport native vlan 1002.The traffic failed from one switch to another switch what may be the reason?
A) The native VLAN must with same VLAN ID at both end before running the above command.
B) VLAN 1002 is not allowed the Ethernet traffic.
C) The interfaces should be belongs to VLAN 1002.
D) VTP should be configured on both interfaces.
-
5. Which of the following gather information from neighboring devices?
A) CDP.
B) 802.1Q.
C) LLDP.
D) All of the above.
-
6. Which command used to turn off CDP?
A) Sw(config)#no cdp.
B) Sw(config)#no cdp run.
C) Sw(config)#no cdp enable.
D) Sw(config)#disable cdp.
-
7. On which interval CDP frames sent out from a device?
A) Every 120 seconds.
B) Every 90 seconds.
C) Every 180 seconds.
D) Every 60 seconds.
-
8. Which of the following is Cisco proprietary protocol collects information from neighboring devices?
A) CDP.
B) LLDP.
C) 802.1a.
D) 802.1Q.
-
9. What is the default value of the CDP holddown timer?
A) 60 seconds.
B) 180 seconds.
C) 90 seconds.
D) 120 seconds.
-
10. Which of the following command can be used to turn off CDP?
A) Switch(config-if)#cdp disable.
B) Sw(config-if)#no cdp.
C) Sw(config-if)#no cdp enable.
D) Sw(config-if)#no cdp run.
Attend all Practice exam for ccna 200-301 on this site. Every quiz on this website have different questions there are approx 200 quiz available here on this site for Practice exam for ccna 200-301. for explanation of any question you may explore our website via this link. This website covers almost topics of CCNA 200-301.
I hope you found this Practice exam for ccna 200-301 interesting and useful. You can take more Practice test for ccna 200-301 on this website. For any query or suggestions you may drop a comment below or contact us. Read more articles for CCNA on this site. Share this webpage in your social circle by the icons below.
